Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 73030 | HAMILTON SUNDSTRAND CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AAHH | FIRST END GROOVE DIAMETER | 0.5950 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| ABHP | OVERALL LENGTH | 2.215 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.1530 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.1310 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.0200 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| ZZZV | FSC APPLICATION DATA | DRIVE CONSTANT SPEED,HYDRAULIZ |
| CSPY | LARGEST STEP DIAMETER | 0.939 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |