Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.187 INCHES NOMINAL |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 13.000 INCHES NOMINAL OVERALL |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END |
| ADLG | FIRST END FITTING SPEC/STD DATA | NAS-1760-80205 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBD | BURST TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-83797,SIZE 16 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ALCOHOL RESISTANT AND SOLVENT RESISTANT |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY, AMS 4112, ALLOY 2024, T6 |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQRB | SEAT ANGLE | 12.0 DEGREES 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE ERR-100 |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 625.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 2ND END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| AARX | INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY, AMS 4112, ALLOY 2024, T6 |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| THSD | THREAD SERIES DESIGNATOR | UNJ 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| ADLH | SECOND END FITTING SPEC/STD DATA | NAS-1760-80205 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |