Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MUNUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE, FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
CAGE Information
| Code | Company |
|---|---|
| 02111 | VISHAY THIN FILM LLC DBA VISHAY SPEC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | 0.748 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.748 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 0.90 INCH-OUNCES |
| AEDX | SHAFT STYLE | ROUND |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 5TH SECTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 25000.0 5TH SECTION |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AEDZ | SHAFT BEARING TYPE | BALL |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| ABXF | SHAFT LENGTH | 0.375 INCHES NOMINAL |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| ABHP | OVERALL LENGTH | 2.593 INCHES MAXIMUM |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.55/+0.55 2ND SECTION |
| AAPN | SECTION QUANTITY | 5 |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.55/+0.55 3RD SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 20 TURRET |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 PERCENT, RATED AMPERES C DROP SIDING |
| ADAQ | BODY LENGTH | 2.593 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| AEFY | SHAFT END PLAY | 0.002 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| ABPM | BODY DIAMETER | 0.775 INCHES NOMINAL |
| TEST | TEST DATA DOCUMENT | 06481-910017 DRAWING |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 35.0 PERCENT, RATED AMPERES C AND BETTER V.G. STEPPING |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 90.0 ALL SECTIONS |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 8.75 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AECZ | MOUNTING LIP DIAMETER | 0.7750 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.7490 INCHES MINIMUM AND 0.7590 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 4375.0 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30/+0.30 4TH SECTION |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 17500.0 4TH SECTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 4375.0 3RD SECTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 6250.0 1ST SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 8.75 PERCENT, RATED AMPERES C AND BETTER SELECT |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 1ST SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -5.0/+5.0 OHMS ALL SECTIONS |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 12.5 PERCENT, RATED AMPERES C AND BETTER FINISH |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 180.0 NOMINAL |