Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 32067 | MARVIN ENGINEERING CO. INC. |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, F-16 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | TONGUE ROUNDED ENDS |
| AMFZ | SECOND END DIAMETER | 0.3120 INCHES NOMINAL |
| AMFY | SECOND END TONGUE WIDTH | 0.1800 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/12 FED SPEC SINGLE MATERIAL RESPONSE |
| FEAT | SPECIAL FEATURES | USED ON AMRAAM LAU128A;WEAPON SYSTEM ESSENTIAL |
| AMFX | SECOND END TONGUE THICKNESS | 0.1800 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| AMDJ | FIRST END TONGUE THICKNESS | 0.1800 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| CSQZ | FIRST END STEP LENGTH | 0.7900 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 |
| ABHP | OVERALL LENGTH | 9.920 INCHES NOMINAL |
| AMDK | FIRST END TONGUE WIDTH | 0.1800 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| CTBM | SECOND END STEP LENGTH | 1.3900 INCHES NOMINAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| AMDL | FIRST END DIAMETER | 0.3120 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | TONGUE ROUNDED ENDS |