Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
Code |
Company |
24617 |
GENERAL MOTORS CORP |
Characteristics (Decoded)
MRC |
Requirements Statement |
Clear Text Reply |
ADAV |
OVERALL DIAMETER |
0.359 INCHES NOMINAL |
AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
MATT |
MATERIAL |
STEEL COMP 1010 OVERALL |
ABNM |
THICKNESS |
0.032 INCHES NOMINAL |
AAUB |
HOLE DIAMETER |
0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5042 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
Similar Parts