Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 64104 | DRESSER INC. DIV DRESSER WAUKESHA |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.5620 INCHES MINIMUM AND 0.5640 INCHES MAXIMUM |
| AMGS | SECOND END HOLE DIAMETER | 0.2650 INCHES NOMINAL |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLATTED |
| MATT | MATERIAL | STEEL COMP 316 |
| ABHP | OVERALL LENGTH | 7.375 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.620 INCHES MINIMUM AND 0.622 INCHES MAXIMUM |
| AMCX | FIRST END FLAT LENGTH | 1.187 INCHES NOMINAL |
| AMCW | FIRST END FLAT DEPTH | 0.0312 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| AMFZ | SECOND END DIAMETER | 0.5620 INCHES MINIMUM AND 0.5640 INCHES MAXIMUM |