Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 24446 | GENERAL ELECTRIC CO |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNEF |
| ADBG | NUT THICKNESS | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPH | SMALL END DIAMETER | 0.672 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| AZKQ | TEMP RATING | NOT RATED |
| AAJD | THREAD CLASS | 2B |
| ADBJ | UNDERCUT THICKNESS | 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ACTD | NUT DIAMETER | 0.922 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |