Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 10543 |
CANADIAN GENERAL ELECTRIC CO LTD |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CXYR |
SECOND END ANGLE BETWEEN FLATS |
90.0 DEGREES NOMINAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMFN |
SECOND END FLAT DEPTH |
0.2800 INCHES NOMINAL |
| CSPY |
LARGEST STEP DIAMETER |
0.500 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.2491 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
FLAT GROOVED |
| FEAT |
SPECIAL FEATURES |
2ND FLAT GROVE 90DEGREES TO 1ST |
| CTBM |
SECOND END STEP LENGTH |
0.300 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
2 |
| MATT |
MATERIAL |
STEEL |
| ABHP |
OVERALL LENGTH |
1.820 INCHES NOMINAL |
| AMFP |
SECOND END FLAT LENGTH |
0.250 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
TWO FLATS |
Similar Parts