Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHNX | BOLT HOLE DIAMETER | 0.750 INCHES NOMINAL 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CQGM | MAXIMUM OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH |
| CQBD | BURST TEST PRESSURE | 1400.0 POUNDS PER SQUARE INCH |
| ABKG | BOLT CIRCLE DIAMETER | 4.750 INCHES NOMINAL 1ST END |
| AARX | INSIDE DIAMETER | 1.810 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL; END MATES WITH ANSI B16.5 150 POUND FLANGE; ASSEMBLY HAS 90 DEGREE ELBOW 18.5 INCH FROM EACH END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED POLYESTER CORD ERR-100 |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OXIDATION RESISTANT AND LIGHT RESISTANT AND ABRASION RESISTANT AND WEATHERPROOF |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 13.250 INCHES |
| CTCJ | FLANGE STYLE | ROUND W/ BOLT HOLES 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED POLYESTER CORD ERR-100 |
| AEPR | FLANGE OUTSIDE DIAMETER | 6.000 INCHES NOMINAL 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 37.000 INCHES NOMINAL OVERALL |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABKV | OUTSIDE DIAMETER | 2.220 INCHES NOMINAL |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 700.0 POUNDS PER SQUARE INCH |
| ABKU | FLANGE THICKNESS | 0.440 INCHES NOMINAL 1ST END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE AND WATER, SALT SINGLE RESPONSE |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | 56430-AE-TED-010 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| AGAV | END ITEM IDENTIFICATION | SHIP; EAFW MISC PARTS |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | DOGLEG HOSE ASSEMBLY |