Part Number
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code | Company |
|---|---|
| 78286 | SIKORSKY AIRCRAFT CORPORATION |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | STABILATOR/SAS TEST |
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-18177. TYPE GEE MIL SPEC SINGLE MATERIAL RESPONSE BOARD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| ABCT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.313 INCHES |
| ABCU | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.037 INCHES |
| ABGN | BOARD OVERALL LENGTH | 5.000 INCHES |
| CWLG | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW |
| ABGP | BOARD OVERALL WIDTH | 3.500 INCHES |
| ABGT | BOARD THICKNESS | 0.090 INCHES |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.250 INCHES |
| ABCS | TERMINAL ROW QUANTITY | 6 |
| AAQL | BODY STYLE | STRIP TYPE |
| ABDV | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.000 INCHES |
| MARK | SPECIAL MARKINGS | WITH SHORT END UP, ON FRONT: "R DESIGNATION" CENTERED ON TOP EDGE AND NUMERALS FROM 1 TO 9 IN ASCENDING ORDER FROM LEFT TO RIGHT ABOVE TOP ROW OF TERMINALS AND "A4" CENTERED ON BOTTOM EDGE; ON BACK: "TERMINAL DESIG" CENTERED ON TOP EDGE AND NUMERALS FROM 9 TO 1 IN DESCENDING ORDER FROM LEFT TO RIGHT ABOVE THE TOP ROW OF TERMINALS |
| FEAT | SPECIAL FEATURES | 6 ROWS OF TERMINALS, CENTERED: 0.380, 1.380, 1.750, 2.750. 2.750, 3.120 AND 4.120 INCHES ABOVE BOTTOM MOUNTING HOLES |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.250 INCHES |
| MATT | MATERIAL | PLASTIC EPOXY BOARD AND GLASS FIBER BOARD |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.500 INCHES |
| AAMA | MOUNTING HOLE DIAMETER | 0.156 INCHES |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | COMPONENT BOARD, STABILATOR/SAS TEST UNIT |