Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 96214 | RAYTHEON COMPANY |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| AASL | HEAD DIAMETER | 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.260 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| AAWC | FIRST DIAMETER FROM HEAD | 0.085 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASA | THREAD LENGTH | 0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 321 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASK | HEAD STYLE | PAN |
| CMLP | THREAD QUANTITY PER INCH | 40 |