Part Number
Part Number:
NSN:
NIIN:
Item Name:
STARTER , MOTOR
Definition:
A DEVICE PRIMARILY DESIGNED TO CONTROL THE SUPPLY CIRCUIT(S) OF A MOTOR IN ORDER TO ACCELERATE THE MOTOR FROM REST TO NORMAL SPEED. INCLUDES MANUAL STARTERS WITH OVERLOAD PROTECTION AND MANUAL, AUTOMATIC OR SEMIAUTOMATIC STARTERS CONSISTING OF COMBINATIONS OF ITEMS SUCH AS RELAYS, RESISTORS, SWITCHES, CIRCUIT BREAKERS, ETC. EXCLUDES RELAY-SWITCH; CIRCUIT BREAKER; SWITCH (AS MODIFIED) AND RELAY (AS MODIFIED). FOR DEVICES, WHICH IN ADDITION TO STARTING AND STOPPING, REVERSE, SELECT AND/OR REGULATE THE SPEED OF A MOTOR, SEE CONTROLLER (AS MODIFIED).
CAGE Information
| Code | Company |
|---|---|
| 01121 | ROCKWELL AUTOMATION INC. |
Federal Supply Class
Title
ELECTRICAL CONTROL EQUIPMENT
Inclusions:
INCLUDES CONTACTORS; MOTOR CONTROLLERS; POWER SERVOMECHANISMS; SWITCHGEAR; VOLTAGE REGULATORS.
Exclusions:
EXCLUDES AUTOMATIC PILOT MECHANISMS; RELAYS; RESISTORS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABMK | OVERALL WIDTH | 9.250 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 9.250 INCHES NOMINAL |
| AQZF | CONTROL TYPE | REMOTE |
| ANRK | SWITCH FUNCTIONAL POSITIONS | RESET |
| AGLD | PERFORMANCE TYPE | SEMIAUTOMATIC |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ANDW | LOAD PROTECTION TYPE | OVERLOAD AND UNDERVOLTAGE RELEASE |
| ANDE | ACTUATOR VOLTAGE | 120.0 AC |
| FEAT | SPECIAL FEATURES | SEPARATE CONTROL |
| ABHP | OVERALL LENGTH | 15.125 INCHES NOMINAL |
| ANPZ | INCLOSURE FEATURE | OPEN |
| FAAZ | PHASE | THREE |
| ACYN | AC VOLTAGE RATING | 600.0 VOLTS MAXIMUM |
| ANQC | NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION STANDARDS DESIGN | DESIGNED PER NEMA STD |
| ANCY | HORSEPOWER RATING | 75.000 AND 100.000 |
| ACZB | FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AJXE | SIZE DESIGNATOR | 5 |
| AFLW | ACTUATION METHOD | MAGNETIC |
| ABKW | OVERALL HEIGHT | 7.750 INCHES NOMINAL |
| ALCD | USAGE DESIGN | LINE STARTER |
| ANCN | OPERATING VOLTAGE CHARACTERISTIC | FULL |
| ALGC | MOUNTING CONFIGURATION | THREE MTGHOLES,ONE HOLE CENTERED AT TOP,TWO BOTTOM HOLES 7 IN.FROM CENTER TO CENTER WITH TOP HOLE 13-1/2 IN. FROMBOTTOM HOLES |