Part Number
Definition:
AN AXLE HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS), PERIPHERSL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOLDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS COUPLINGS AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO TRANSMIT MOTION SEE SHAFT(1), SHOULDER. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1),STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 19204 | ARMY UNITED STATES DEPARTMENT OF THE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDX | FIRST END HOLE DIAMETER | 0.2010 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 105MM M101A1 |
| ATPC | STEP QUANTITY | 15 |
| MATT | MATERIAL | STEEL |
| ABHP | OVERALL LENGTH | 82.004 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.2810 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| CSPY | LARGEST STEP DIAMETER | 0.4624 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.1250 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |