Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSPY | LARGEST STEP DIAMETER | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 2.235 INCHES MINIMUM AND 2.265 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 2 |
| FEAT | SPECIAL FEATURES | THRU BORE, 0.875 IN. DIA FIRST END; THREE 0.190-24 UNJC-3B HOLES ON A 1.500 IN. DIA BOLT CIRCLE ON THE FIRST END; CBORE, 0.985 IN. DIA 0.500 IN. DEEP SECOND END; THREE 0.190-24 UNJC-3B HOLES EQUALLY SPACED 120.0 DEG APART ON SECOND END |
| AGAV | END ITEM IDENTIFICATION | 1336-00-516-5587 AIM-9 GUIDED MISSILE HIGH EXPLOSIVE WARHEAD FOR THE SEAL DELIVERY VEHICLE |