Part Number
Definition:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
CAGE Information
| Code | Company |
|---|---|
| 01276 | EATON-AEROQUIP INC DIV FLUID CONNECT |
Federal Supply Class
Title
HOSE, PIPE, TUBE, LUBRICATION, A
Inclusions:
INCLUDES ADAPTERS; BENDS; CAPS; CLAMPS; CONNECTORS; COUPLINGS; CROSSES; ELBOWS; EXPANSION JOINTS; FERRULES; FLANGES; LATERALS; LUBRICATION FITTINGS; MANIFOLDS; NIPPLES; NOZZLES; OUTLETS; PLUGS; REDUCERS; SWING AND SWIVEL JOINTS; TEES; TRAPS; UNIONS; WYES.
Exclusions:
EXCLUDES AIR CONDITIONING-HEATING FITTINGS (FSC 4520); BITUMINIZED FIBER AND CONCRETE FITTINGS (FSC 5630); CONDUIT BOXES AND FITTINGS (FSC 5975); DOWNSPOUT FITTINGS (FSC 5670); MEDICAL AND SURGICAL FITTINGS (FSC 6515); LABORATORY FITTINGS (FSC 6640); POST CAPS AND RAIL ENDS (FSC 5660); MACHINE THREAD BUSHINGS AND PLUGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | FLARELESS |
| STYL | STYLE DESIGNATOR | FLARELESS |
| MATL | MATERIAL | STEEL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 14 FIGURE |
| AHTC | FLANGE OUTSIDE DIAMETER | 0.367 INCHES NOMINAL |
| ARYW | SLEEVE OUTSIDE DIAMETER | 0.312 INCHES NOMINAL |
| CPMS | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.250 NOMINAL INCHES |
| AGAV | END ITEM IDENTIFICATION | GRUMMAN A10 AIR CRAFT |
| ZZZK | SPECIFICATION/STANDARD DATA | 81343-J514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ABHP | OVERALL LENGTH | 0.363 INCHES NOMINAL |
| SURF | SURFACE TREATMENT | PHOSPHATE |
| AASG | CASEHARDENING INDICATOR | NOT CASEHARDENED |
| AJFY | SEAT ANGLE IN DEG | 40.0 |