Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , BEVEL
Definition:
A GEAR IN THE FORM OF A FRUSTUM OF A CONE, WITH STRAIGHT, SKEWED, OR CURVED TEETH, CUT ON THE EXTERNAL FACE. SEE ALSO GEAR, ANTIBACKLASH, BEVEL.
CAGE Information
| Code | Company |
|---|---|
| 19204 | ARMY UNITED STATES DEPARTMENT OF THE |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BDZQ | BACKLASH DESIGNATION | GRADE A |
| BDZQ | BACKLASH DESIGNATION | GRADE A |
| CWTX | HUB NOMINAL DIAMETER | 3.500 INCHES SECOND END |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.3240 INCHES FIRST END |
| CWFR | NOMINAL OVERALL LENGTH | 2.512 INCHES |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING |
| AAQL | BODY STYLE | PLAIN, WITH LIGHTENING HOLES |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.625 INCHES SECOND END |
| CWMW | TEETH TYPE | STRAIGHT |
| ABSA | SPLINE QUANTITY | 31 BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 13.0140 INCHES |
| AGJS | PITCH DIAMETER | 13.0000 INCHES NOMINAL |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 1.625 INCHES |
| FEAT | SPECIAL FEATURES | 63 MICROINCH AA FINISH ON TOOTH SURFACE OF GEAR AND INTERNAL SPLINE,HUBEND FIRST END CHAMFERED TO 0.125 IN.BY45 DEG,OD OF HUB SECOND END ANGLED FROM HUB END TO GEAR BODY BY 6 DEG 47 MIN21 SEC |
| BDTX | SPLINE PITCH DIAMETER | 1.9375 INCHES NOMINAL BOTH ENDS |