Part Number
Part Number:
NSN:
NIIN:
Item Name:
SCREW ASSEMBLY , PANEL
Definition:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
CAGE Information
| Code | Company |
|---|---|
| 05869 | RAYTHEON COMPANY DBA RAYTHEON |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASB | FASTENER LENGTH | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| MATT | MATERIAL | COPPER ALLOY 360 STAND-OFF |
| SFTT | SURFACE TREATMENT | CADMIUM FASTENER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| AASA | THREAD LENGTH | 0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE FASTENER OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE FASTENER |
| MATT | MATERIAL | STEEL COMP 4037 FASTENER OR STEEL COMP 8740 FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM FASTENER AND 38.0 ROCKWELL C MAXIMUM FASTENER |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | 0.142 INCHES MINIMUM AND 0.152 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| SFTT | SURFACE TREATMENT | CADMIUM STAND-OFF |
| AASL | HEAD DIAMETER | 0.231 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |