Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 03538 | LOCKHEED MARTIN CORPORATION DBA MS2 |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AKTN | SECOND END SLOT WIDTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 2.300 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.1253 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AAHP | SECOND END STYLE | SLOTTED |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.216 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.125 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| ATPC | STEP QUANTITY | 2 |
| AAHG | FIRST END GROOVE WIDTH | 0.0190 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.1246 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.0960 INCHES NOMINAL |
| AMGR | SECOND END SLOT DEPTH | 0.340 INCHES NOMINAL |