Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 19204 | ARMY UNITED STATES DEPARTMENT OF THE |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASB | FASTENER LENGTH | 1.470 INCHES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY 675 OVERALL |
| AASA | THREAD LENGTH | 0.250 INCHES MAXIMUM |
| AASK | HEAD STYLE | PAN NO. 2 |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AAJD | THREAD CLASS | 3A |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AAWE | THIRD DIAMETER FROM HEAD | 0.271 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.090 INCHES NOMINAL |
| AAWC | FIRST DIAMETER FROM HEAD | 0.412 INCHES MINIMUM AND 0.427 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAWK | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | 1.470 INCHES NOMINAL |
| AAWD | SECOND DIAMETER FROM HEAD | 0.500 INCHES NOMINAL |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.620 INCHES NOMINAL |