Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOUNT , RESILIENT , WEAPON SYSTEM
Definition:
AN ITEM MADE OF MATERIAL HAVING ELASTIC PROPERTIES. IT MAY HAVE RIGID MOUNTING FACILITIES SUCH AS A FLANGE(S), SLEEVE(S), STUD(S) OR THE LIKE. IT IS DESIGNED TO ISOLATE OR DAMPEN SHOCK AND/OR VIBRATION OF A CONTINUOUS OR INTERMITTENT ORIGIN AND SERVE AS A SUPPORT FOR A WEAPON SYSTEM COMPONENT TO BE ISOLATED. EXCLUDES MOUNT, RESILIENT, GENERAL PURPOSE; SPRING (AS MODIFIED); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; HYDRAULIC AND PNEUMATIC SHOCK ABSORBERS, DASH-POTS, GROMMETS, AND SHOCK PADS.
CAGE Information
| Code | Company |
|---|---|
| 81860 | BARRY WRIGHT CORPORATION DBA BARRY C |
Federal Supply Class
Title
HARDWARE, WEAPON SYSTEM
Inclusions:
INCLUDES ADAPTERS; ANCHOR PLATES AND STRAPS; ANODES; BELLOWS; COUPLINGS; CONTROL RODS; ACCESS DOORS; FAIRLEADS; MOUNTS; TIE RODS; YOKES.
Exclusions:
EXCLUDES COMMERCIAL HARDWARE (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| HGTH | HEIGHT | 1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORE |
| SFTT | SURFACE TREATMENT | CADMIUM CUP |
| BXCH | SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.930 INCHES MINIMUM AND 1.950 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL BASE PLATE |
| ABKU | FLANGE THICKNESS | 0.060 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CUP |
| AGFF | FLANGE WIDTH | 2.380 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | ROUND W/FLANGED BUSHING FOUR-HOLE FLANGE |
| SFTT | SURFACE TREATMENT | CADMIUM CORE |
| AASF | NONMETALLIC HARDNESS RATING | 55.0 NOMINAL SHORE DUROMETER A |
| BXCW | LOAD/FREQUENCY RANGE | 24.5 TO 25.5 POUND LOAD FOR 29.7 TO 36.3 HERTZ |
| BXCQ | FLANGE MOUNTING HOLE DIAMETER | 0.196 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | CADMIUM BASE PLATE |
| ABUJ | THREAD SIZE | 0.250-20UNC-2B ALL THREADED PORTIONS |
| AFQN | FLANGE LENGTH | 2.380 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | ELASTOMER SHALL BE COATED,MIL-P-23236,TY 1,CL 1 OR TY 1,CL 2 |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.930 INCHES MINIMUM AND 1.950 INCHES MAXIMUM |
| BXDM | RESILIENT MEMBER MATERIAL | SILICONE |