Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 90536 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASL | HEAD DIAMETER | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.330 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| AAWC | FIRST DIAMETER FROM HEAD | 0.100 INCHES NOMINAL |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.560 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASU | HEAD HEIGHT | 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| ASDB | WIDTH ACROSS FLATS | 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.890 INCHES MINIMUM AND 0.930 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |