Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , RECESSED
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | OUTSIDE EDGE CHAMFERED 0.050 TO 0.080 BY 40.0 TO 50.0 DEG |
| FEAT | SPECIAL FEATURES | OUTSIDE EDGE CHAMFERED 0.050 TO 0.080 BY 40.0 TO 50.0 DEG |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.875 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | RECESS |
| ABMD | RECESS DIAMETER | 0.708 INCHES MINIMUM AND 0.715 INCHES MAXIMUM |
| CSTM | RECESS ANGLE | 89.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.504 INCHES MINIMUM AND 0.514 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 8630 OVERALL |