Part Number
Definition:
A FITTING THAT FORMS AN ANGLE OF LESS THAN 180 DEGREES (3.141 RADIANS) FROM THE STRAIGHT FLOW. IT HAS A FLANGE CONNECTION ON ONE END DESIGNED TO CONNECT WITH ANOTHER FLANGE CONNECTION, OR A COMPRESSION TYPE MOUNTING PAD. THE OTHER END HAS EXTERNAL AND/OR INTERNAL MACHINE THREADS (STRAIGHT THREADS OTHER THAN PIPE OR HOSE SERIES), AND IS DESIGNED TO FACILITATE A GASKET, PREFORMED PACKING, WASHER, OR THE LIKE, TO FORM A SEAL AT THE BOSS. IT MAY HAVE SIDE AND/OR HEEL INLET(S).
CAGE Information
| Code | Company |
|---|---|
| 77445 | UNITED TECHNOLOGIES CORPORATION DBA |
Federal Supply Class
Title
HOSE, PIPE, TUBE, LUBRICATION, A
Inclusions:
INCLUDES ADAPTERS; BENDS; CAPS; CLAMPS; CONNECTORS; COUPLINGS; CROSSES; ELBOWS; EXPANSION JOINTS; FERRULES; FLANGES; LATERALS; LUBRICATION FITTINGS; MANIFOLDS; NIPPLES; NOZZLES; OUTLETS; PLUGS; REDUCERS; SWING AND SWIVEL JOINTS; TEES; TRAPS; UNIONS; WYES.
Exclusions:
EXCLUDES AIR CONDITIONING-HEATING FITTINGS (FSC 4520); BITUMINIZED FIBER AND CONCRETE FITTINGS (FSC 5630); CONDUIT BOXES AND FITTINGS (FSC 5975); DOWNSPOUT FITTINGS (FSC 5670); MEDICAL AND SURGICAL FITTINGS (FSC 6515); LABORATORY FITTINGS (FSC 6640); POST CAPS AND RAIL ENDS (FSC 5660); MACHINE THREAD BUSHINGS AND PLUGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRFY | FLOW ANGLE | 90.0 DEGREES |
| CRFY | FLOW ANGLE | 90.0 DEGREES |
| SFTT | SURFACE TREATMENT | PASSIVATE INSIDE |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL BOSS 2ND END |
| ARKN | FLANGE SHAPE | RECTANGULAR WITH HOLES 1ST END |
| MATT | MATERIAL | STEEL COMP 347 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OUTSIDE |
| AKGF | NOMINAL WIDTH | 2.396 INCHES 1ST END |
| AWLS | CONNECTION TYPE | FLANGE 1ST END |
| AHSJ | LEG LENGTH | 2.440 INCHES MINIMUM 2ND END AND 2.460 INCHES MAXIMUM 2ND END |
| AAJD | THREAD CLASS | 3A 2ND END |
| AHSJ | LEG LENGTH | 1.019 INCHES MINIMUM 1ST END AND 1.049 INCHES MAXIMUM 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNS 2ND END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5646 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.500 INCHES 2ND END |
| CWDF | FLANGE FACE DESIGN | RAISED STRAIGHT 1ST END |
| AKGG | NOMINAL LENGTH | 2.396 INCHES 1ST END |
| CWCY | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.656 INCHES 1ST END |