Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , STRAIGHT
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMDN |
FIRST END SPLINE MINOR DIAMETER |
0.6600 INCHES MINIMUM AND 0.6700 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 8640 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| AMDS |
FIRST END PITCH DIAMETER |
0.0960 INCHES NOMINAL |
| AMDR |
FIRST END PRESSURE ANGLE |
30.0000 DEGREES NOMINAL |
| AAGZ |
FIRST END STYLE |
SPLINED (INVOLUTE) |
| ABHP |
OVERALL LENGTH |
9.470 INCHES NOMINAL |
| AMDP |
FIRST END SPLINE MAJOR DIAMETER |
0.7885 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-624 FED SPEC ALL MATERIAL RESPONSES |
| AMDM |
FIRST END SPLINE LENGTH |
0.880 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
IDENTICAL |
Similar Parts