Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ATPC |
STEP QUANTITY |
6 |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAHH |
FIRST END GROOVE DIAMETER |
0.1170 INCHES NOMINAL |
| AMCY |
FIRST END DISTANCE FROM END TO GROOVE |
0.064 INCHES NOMINAL |
| AAHG |
FIRST END GROOVE WIDTH |
0.0170 INCHES NOMINAL |
| AMFW |
SECOND END DISTANCE FROM KEYWAY CENTER TO END |
0.253 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
WOODRUFF KEYWAY AND CIRCULAR GROOVED |
| ABHP |
OVERALL LENGTH |
2.781 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CIRCULAR GROOVED |
| AMFR |
SECOND END KEYWAY WIDTH |
0.0620 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| CSPY |
LARGEST STEP DIAMETER |
0.375 INCHES NOMINAL |
| AMFQ |
SECOND END DISTANCE FROM END TO GROOVE |
0.064 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
1.1972 INCHES NOMINAL |
| AMFS |
SECOND END EXTERNAL KEYWAY LENGTH |
0.312 INCHES NOMINAL |
| AAHX |
SECOND END GROOVE DIAMETER |
0.2310 INCHES NOMINAL |
| AAHW |
SECOND END GROOVE WIDTH |
0.0280 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.1875 INCHES NOMINAL |
Similar Parts