Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Federal Supply Class
Title
VEHICULAR POWER TRANSMISSION COM
Inclusions:
INCLUDES TRANSFER TRANSMISSION ASSEMBLIES; CLUTCH ASSEMBLIES; UNIVERSAL JOINTS; PROPELLER SHAFTS; AUTOMOTIVE TORQUE CONVERTERS; POWER TAKEOFFS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATKT | FIRST END THREAD SERIES | UNF |
| AETC | METALLIC HARDNESS RATING | 42.0 MINIMUM ROCKWELL C AND 48.0 MAXIMUM ROCKWELL C |
| MATL | MATERIAL | STEEL, SAE 1033 |
| AMDG | FIRST END KEYWAY DEPTH | 0.127 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| AMCP | FIRST END TAPER | 1.000 INCHES PER SQUARE INCH BLANK |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.039 INCHES MINIMUM AND 1.049 INCHES MAXIMUM |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| AMGA | SECOND END SPLINE LENGTH | 1.500 INCHES NOMINAL |
| AMQF | SECOND END TYPE | SPLINED |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| AMCR | FIRST END TAPER MAJOR DIAMETER | 1.377 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.222 INCHES MINIMUM AND 1.227 INCHES MAXIMUM |
| AQSQ | FIRST END THREAD SIZE | 1-14 |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| AMQA | FIRST END TYPE | TAPERED |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| AMCZ | FIRST END KEYWAY WIDTH | 0.2485 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| ABHP | OVERALL LENGTH | 21.428 INCHES MINIMUM AND 21.478 INCHES MAXIMUM |
| BNYZ | FIRST END PIN HOLE DIAMETER | 0.172 INCHES NOMINAL |