Part Number
Part Number:
NSN:
NIIN:
Item Name:
COLLAR , CABLE
Definition:
AN ITEM DESIGNED TO BE AFFIXED AROUND AN ELECTRICAL CABLE TO LIMIT THE AXIAL MOVEMENT OF THE CABLE AT THE POINT WHERE IT PASSES THROUGH AN OPENING. IT HAS NO FACILITIES FOR RETAINING THE CABLE TO ANOTHER OBJECT. EXCLUDES BUSHING, STRAIN RELEIF, CABLE.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
ELECTRICAL HARDWARE AND SUPPLIES
Inclusions:
INCLUDES CONDUIT; RACEWAYS; FACE PLATES; CONDULETS; OUTLET AND JUNCTION BOXES; POLE LINE HARDWARE, NOT ELSEWHERE CLASSIFIABLE.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CABLE ENTRY FLANGE |
| AGAV | END ITEM IDENTIFICATION | AN/WLD-1(V) MINE HUNTING SYS; ANTENNA MAST |
| CSPC | ACCOMMODATION HOLE INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.190 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| MATT | MATERIAL | ANY ACCEPTABLE BODY |
| ABHP | OVERALL LENGTH | 1.000 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | OUTER DIAMETER OF FLANGE IS 2.000 INCHES, CUT OFF ON EACH SIDE SO THAT TOP AND BOTTOM ARCS ARE 1.500 IN. AND VERTICAL SIDES MEASURE 1.500; 4 MOUNTING HOLES ARE 0.170 IN. IN DIAM, 0.168 IN. APART IN BOTH DIRECTIONS; INNER DIAMETER IS 0.635 AT FLANGE EDGE AND 0.812 AT OPPOSITE END |
| STYL | STYLE DESIGNATOR | ANNULAR |