Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAGZ |
FIRST END STYLE |
PLAIN |
| ABHP |
OVERALL LENGTH |
1.750 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES |
| AMDL |
FIRST END DIAMETER |
0.4723 INCHES MINIMUM AND 0.4726 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1112 OR STEEL COMP 1013 OR STEEL COMP 1113 OR STEEL COMP 1020 |
| CSPY |
LARGEST STEP DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ATPC |
STEP QUANTITY |
3 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633 FED SPEC ALL MATERIAL RESPONSES |
| FEAT |
SPECIAL FEATURES |
PHOSPHATE COAT,TYPE M,CLASS 2,PERSPEC MIL-P-16232 |
| AAHN |
END SIMILARITY |
IDENTICAL |
Similar Parts