Part Number
Definition:
A HIGH STRENGTH, 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH EXTERNALLY THREADED FASTENER DESIGNED FOR USE IN APPLICATIONS INVOLVING GREAT SHEAR STRESS. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. THE UNTHREADED PORTION IS OF SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE BOLT, MACHINE AND BOLT, CLEVIS.
CAGE Information
| Code | Company |
|---|---|
| 56878 | SPS TECHNOLOGIES LLC DBA AEROSPACE D |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 76301-23-105 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 1.946 INCHES MINIMUM AND 1.993 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASA | THREAD LENGTH | 0.317 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| CRTL | CRITICALITY CODE JUSTIFICATION | ANEE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| AASU | HEAD HEIGHT | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.831 INCHES MINIMUM FIRST HOLE AND 1.868 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| AATB | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| ANEE | GRIP LENGTH | 0.1546 INCHES MINIMUM AND 0.1593 INCHES MAXIMUM |