Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDL | FIRST END DIAMETER | 2.6890 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 1.2500 INCHES MINIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| ZZZV | FSC APPLICATION DATA | BOOM HOIST CABLE DRUM DRIVE TRUCK WRECKER,5 TON |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.219 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 4.000 INCHES MINIMUM AND 4.001 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 9 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI OR SAE 4340H OR 9840H ASSN STD SINGLE MATERIAL RESPONSE |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.875 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.0940 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 59.0 MICROINCHES |
| MATT | MATERIAL | STEEL |
| AAHP | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 28.203 INCHES NOMINAL |