Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Federal Supply Class
Title
VEHICULAR POWER TRANSMISSION COM
Inclusions:
INCLUDES TRANSFER TRANSMISSION ASSEMBLIES; CLUTCH ASSEMBLIES; UNIVERSAL JOINTS; PROPELLER SHAFTS; AUTOMOTIVE TORQUE CONVERTERS; POWER TAKEOFFS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGA | SECOND END SPLINE LENGTH | 2.500 INCHES NOMINAL |
| MATL | MATERIAL | STEEL, AISI 8653 |
| BNYS | FLANGE OVERALL THICKNESS | 1.125 INCHES NOMINAL |
| AHTC | FLANGE OUTSIDE DIAMETER | 6.250 INCHES MINIMUM AND 6.270 INCHES MAXIMUM |
| AETC | METALLIC HARDNESS RATING | 34.3 MINIMUM ROCKWELL C AND 39.1 MAXIMUM ROCKWELL C |
| AMGF | SECOND END PITCH DIAMETER | 1.680 INCHES NOMINAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 26.5 |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| AMQF | SECOND END TYPE | SPLINED |
| AMQA | FIRST END TYPE | FLANGED |
| ABQB | TAPER MAJOR DIAMETER | 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| BNYW | FLANGE HOLE TAPER | 6.000 INCHES PER SQUARE INCH BLANK |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| FEAT | SPECIAL FEATURES | BRACKET EYE LOCATED ON EXTERNAL SIDE OF FLANGE-15/16 IN. DIA EYE |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BBCF | SECOND END SPLINE QUANTITY | 27 |
| ABHP | OVERALL LENGTH | 42.885 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.938 INCHES NOMINAL |