Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CSPY |
LARGEST STEP DIAMETER |
0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
PLAIN |
| ZZZV |
FSC APPLICATION DATA |
OUTPUT,TRANSMISSION POWER TAKE-OFF,TRUCK,UTILITY |
| AMFS |
SECOND END EXTERNAL KEYWAY LENGTH |
1.000 INCHES NOMINAL |
| AMFT |
SECOND END KEYWAY DEPTH |
0.0937 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
DISTANCE BETWEEN KEYWAY CENTERS 0.2405 IN. |
| AMFW |
SECOND END DISTANCE FROM KEYWAY CENTER TO END |
0.625 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI OR SAE ASSN STD SINGLE MATERIAL RESPONSE |
| AMDL |
FIRST END DIAMETER |
0.7870 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 8620 |
| AAHP |
SECOND END STYLE |
INDENTED FLAT KEYWAY |
| AMFR |
SECOND END KEYWAY WIDTH |
0.1875 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
4 |
| ABHP |
OVERALL LENGTH |
3.998 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
Similar Parts