Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMCX | FIRST END FLAT LENGTH | 1.313 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLATTED |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI C1040-C1045 ASSN STD SINGLE MATERIAL RESPONSE |
| AMDL | FIRST END DIAMETER | 0.9970 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.9970 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | TWO SLOTS 0.250 R,0.625 IN. CENTER TO CENTER;HOLE 3/8-24UNF-2B 1/2 DEEP;HOLE 0.359 IN. DIA,0.375 IN. DEEP |
| AMCW | FIRST END FLAT DEPTH | 0.1250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 6.125 INCHES NOMINAL |
| AAHP | SECOND END STYLE | INTERNAL THREADED |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 2.125 INCHES NOMINAL |