Part Number
Definition:
AN ITEM OF ANY PERIPHERAL SHAPE USUALLY HAVING ONE FLAT OR SPHERICAL SURFACE AND A CENTRALLY LOCATED HOLE. IT IS DESIGNED FOR APPLICATIONS INVOLVING MOVING (KINETIC) LOADS. EXCEPT FOR ITEMS FABRICATED FROM BEARING QUALITY SYNTHETIC (PLASTIC) OR COMPOSED OF MULTILAYER MATERIAL, ONE BEARING SURFACE MUST EITHER HAVE A SPECIFIC SURFACE FINISH DESIGNATION OF 32 MICROINCH (0.8 MICROMETRE) OR LESS, ARITHMETICAL AVERAGE (AA) (ARITHMETIC MEAN DEVIATION) OR ONE OF THE FOLLOWING CONDITIONS: BE LAPPED OR GROUND; HAVE VISIBLE OR DETECTABLE MEANS OF LUBRICATION; GROOVES, INDENTATIONS; OR SELF-LUBRICATION. THE THICKNESS MUST NOT EXCEED 25 PERCENT OF THE OUTSIDE DIAMETER OF THE SHORTEST DISTANCE BETWEEN PERIPHERAL FLATS (WHEN THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE). EXCLUDES STRAIGHT, TUBULAR (WITHOUT FLANGE) ITEMS HAVING A BEARING SURFACE(S) PARALLEL TO THE AXIS OF THE BORE ONLY. SEE ALSO WASHER, FLAT AND SPACER, SLEEVE.
CAGE Information
| Code | Company |
|---|---|
| 99167 | HAMILTON SUNDSTRAND CORPORATION |
Federal Supply Class
Title
BEARINGS, PLAIN, UNMOUNTED
Inclusions:
INCLUDES SLEEVE BEARINGS; SPLIT BEARINGS; WASHER TYPE BEARINGS; JEWEL BEARINGS.
Exclusions:
EXCLUDES ANTIFRICTION BEARINGS (FSC 3110); MOUNTED BEARINGS (FSC 3130).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | ROUND |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| ABKV | OUTSIDE DIAMETER | 1.4480 INCHES MINIMUM AND 1.4580 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0600 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM |
| ADUM | OVERALL THICKNESS | 0.1990 INCHES MINIMUM AND 0.2050 INCHES MAXIMUM |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.8720 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | SHOULDERED |
| MATT | MATERIAL | STEEL COMP 301 OVERALL |
| BZLX | CORNER SHAPE | SQUARE ALL CORNERS |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES RIGHT SIDE OF FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5618 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ABMZ | DIAMETER | 0.5800 INCHES MINIMUM AND 0.5810 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |