Part Number
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
CAGE Information
| Code | Company |
|---|---|
| 89926 | NEW HOLLAND CONSTRUCTION |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.500 INCHES NOMINAL |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.500 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.830 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.900 INCHES NOMINAL |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| ABPT | SECOND STEP DIAMETER | 0.874 INCHES NOMINAL |
| ABVA | UNTHREADED PORTION LENGTH | 0.132 INCHES NOMINAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.900 INCHES NOMINAL |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 13 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 3.947 INCHES MINIMUM AND 4.053 INCHES MAXIMUM |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.047 INCHES MINIMUM AND 5.151 INCHES MAXIMUM |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.514 INCHES MINIMUM AND 0.524 INCHES MAXIMUM |
| ABFF | FURNISHED ITEMS | COOLING FAN AND NUT |