Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHIM
Definition:
A THIN FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID OR LAMINATED CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE AND HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. ITEMS WITH EITHER (1) A SOLID (NOT LAMINATED) CROSS-SECTION, OR (2) A NON-SEPARABLE LAMINATED CROSS-SECTION WITH ONE HOLE CENTRALLY LOCATED, MUST HAVE A THICKNESS LESS THAN 0.006 INCH (0.152 MM) FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) OUTSIDE DIAMETER OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS, AND LESS THAN 0.016 INCH (0.406 MM) FOR ITEMS 1/4 INCH (6.35 MM) OR MORE OUTSIDE DIAMETER, OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS. FOR ITEMS WITH THICKNESS GREATER THAN THOSE INDICATED ABOVE, SEE SPACER, PLATE; WASHER, FLAT AND SPACER, RING. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. SEE ALSO SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; AND BEARING, WASHER, THRUST.
CAGE Information
| Code |
Company |
| 76301 |
BOEING COMPANY THE DBA BOEING |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AGAV |
END ITEM IDENTIFICATION |
F-18, AIRCRAFT |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/SQUARE CORNERS |
| ABMK |
OVERALL WIDTH |
0.800 INCHES NOMINAL |
| BRDY |
LAMINATION THICKNESS |
0.024 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-22499 CL2 TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
0.800 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
SHIM, DRIVE ARM, AIL SHROUD |
| ADVJ |
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE |
0.400 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
1.570 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
ROUNDED AT ONE END |
| AECS |
BOLT HOLE QUANTITY |
2 |
| ADUM |
OVERALL THICKNESS |
0.048 INCHES NOMINAL |
| BRDX |
LAMINATION QUANTITY |
8 |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.390 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.281 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| CQCF |
CONSTRUCTION |
LAMINATED |
Similar Parts