Part Number
Definition:
A WASHER OF NONRESILIENT MATERIAL USUALLY HAVING TWO PARALLEL BEARING SURFACES. THE OUTSIDE AND/OR INSIDE EDGES HAVE ONE OR MORE PROTUBERANCES. THE ENDS AND/OR EDGES MAY BE PREBENT AT ANY ANGLE OR THE PROTUBERANCES MAY BE PREBENT AT ANY ANGLE TO THE BEARING SURFACES. THE KEYS OR LUGS MAY BE FITTED INTO KEYWAYS IN ADJACENT MATERIAL OR THEY MAY BE BENT OVER AFTER APPLICATION TO HOLD OR LOCK ONE OR MORE ITEMS IN PLACE. EXCLUDES THRUST TYPE WASHER.
CAGE Information
| Code | Company |
|---|---|
| 13002 | GOODRICH CORPORATION DBA GOODRICH LA |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQFW | DISTANCE FROM KEY CENTER TO WIRE HOLE CENTER | 0.110 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | FOUR WIRE HOLES 0.190-32 UNF 3B |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.187 INCHES NOMINAL |
| ABLK | INTERNAL PREBENT KEY WIDTH | 0.220 INCHES NOMINAL |
| CRZZ | WIRE HOLE DIAMETER | 0.190 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | INTERNAL PREBENT KEY |
| MATT | MATERIAL | STEEL OVERALL |
| CQFM | HARDNESS RATING | 33.0 ROCKWELL C MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 3.180 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 2.755 INCHES MINIMUM AND 2.765 INCHES MAXIMUM |