Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 76301 | BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,COND HT FED SPEC SINGLE MATERIAL RESPONSE |
| AMDL | FIRST END DIAMETER | 0.9890 INCHES MINIMUM AND 0.9920 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| MATT | MATERIAL | COPPER ALLOY |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 2.600 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.4330 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM |
| AAHH | FIRST END GROOVE DIAMETER | 0.5570 INCHES MINIMUM AND 0.5670 INCHES MAXIMUM |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.235 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 7.030 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 4.500 INCHES NOMINAL |
| AAHP | SECOND END STYLE | INTERNAL THREADED |
| ATPC | STEP QUANTITY | 5 |
| AMFZ | SECOND END DIAMETER | 1.9890 INCHES MINIMUM AND 1.9920 INCHES MAXIMUM |