Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 59793 | HYDAC CORP. |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AZKQ | TEMP RATING | 14.0 DEG FAHRENHEIT MINIMUM AND 212.0 DEG FAHRENHEIT MAXIMUM |
| ADNP | DROP PRESSURE | NOT RATED |
| CRXW | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| APGF | DESIGN TYPE | REUSABLE |
| ABPM | BODY DIAMETER | 1.378 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM |
| AZTL | BODY OVERALL LENGTH | 3.701 INCHES NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
| FEAT | SPECIAL FEATURES | CRES END CAPS; O-RING PROVIDED |
| ADNH | FILTRATION RATING IN MICRONS | 20.0 NOMINAL |
| ADNK | FLOW DIRECTION | INSIDE OUT |
| ADAS | BODY INSIDE DIAMETER | 0.484 INCHES NOMINAL |