Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 05228 | PTI TECHNOLOGIES INC. |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| MATT | MATERIAL | ANY ACCEPTABLE SEAL |
| ADNP | DROP PRESSURE | NOT RATED |
| APGF | DESIGN TYPE | REUSABLE |
| ADNQ | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| ADAS | BODY INSIDE DIAMETER | 0.891 INCHES NOMINAL |
| ADNH | FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| CRXW | FILTERING MEDIA DESIGN | WOVEN SINGLE FILTERING MEDIA RESPONSE |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| ABPM | BODY DIAMETER | 1.625 INCHES NOMINAL |
| AZKQ | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
| AZTL | BODY OVERALL LENGTH | 3.438 INCHES NOMINAL |