Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , HELICAL
Definition:
A GEAR, CYLINDRICAL IN FORM, WITH TEETH ON THE OUTER SURFACE AT AN ANGLE TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, HELICAL:
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CWPP | PRESSURE ANGLE | 10.0000 DEGREES AND 25.0000 DEGREES |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.0000 INCHES |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 4.500 INCHES AXIALLY THROUGH FLANGE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE,RH |
| FEAT | SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1;MATES WITH P/N H832-1662-3 (NSN 3040-01-494-3543) AND -16 (CAGE 96169);MATCHED PAIR H832-1662-3 & 4 NSN 3020-01-494-0562;NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053;USED ON NSSN CLASS SUBMARINE |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.350 INCHES AXIALLY THROUGH FLANGE |
| CWTX | HUB NOMINAL DIAMETER | 2.500 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| AGAV | END ITEM IDENTIFICATION | GEARBOX,RAMMER DRIVE |
| AAQL | BODY STYLE | PLAIN, SOLID |
| CWMW | TEETH TYPE | SPIRAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | DOD-F-24669/1 GR-9310 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWRS | BORE NOMINAL DIAMETER | 2.0500 INCHES BOTH ENDS |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| CWNM | TOOTH DIRECTION | RIGHT |
| ABSA | SPLINE QUANTITY | 32 BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 2.0000 INCHES NOMINAL BOTH ENDS |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| AGJS | PITCH DIAMETER | 6.1900 INCHES MINIMUM AND 6.2100 INCHES MAXIMUM |
| CWRM | FACE NOMINAL WIDTH | 1.4000 INCHES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.458 INCHES BETWEEN BODY AND FLANGE |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH FLANGE |
| MATT | MATERIAL | STEEL COMP E9310 OVERALL |
| AJLA | TEETH QUANTITY | 67 |