Part Number
Definition:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
CAGE Information
| Code | Company |
|---|---|
| 99167 | HAMILTON SUNDSTRAND CORPORATION |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| ABKK | FLANGE DIAMETER | 0.785 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5640 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| ABKU | FLANGE THICKNESS | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL COMP 303 PLUS X OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 303SE OVERALL |
| ACVN | NUT LENGTH | 0.262 INCHES NOMINAL |
| ACTD | NUT DIAMETER | 0.615 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |