Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 13499 | ROCKWELL COLLINS INC. DBA GOVERNMENT |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSQZ | FIRST END STEP LENGTH | 1.344 INCHES NOMINAL |
| CSQZ | FIRST END STEP LENGTH | 1.344 INCHES NOMINAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | AMDL AND AMFZ AND AMGS |
| AMFZ | SECOND END DIAMETER | 0.3125 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGS | SECOND END HOLE DIAMETER | 0.1280 INCHES MINIMUM AND 0.1310 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 303 |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| FEAT | SPECIAL FEATURES | SECOND END STYLE CHAMFERED 0.031 X 45.0 DEG PORM 3.0 DEG; FINISH PASSIVATE, TYPE II PER QQ-P-35 (COLLINS 580-0025-00), FLATTED END EXTERNALLY THREADED 0.250-28UNF-2A, 1.125 FULL THREAD 0.125 THD RUNOUT, ITEM INTERNALLY THREADED 0.138-32 UNC-2B, 0.312 FULL THD |
| CSPY | LARGEST STEP DIAMETER | 0.313 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-582 ASSN STD SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 1.906 INCHES NOMINAL |
| AMDK | FIRST END TONGUE WIDTH | 0.250 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.156 INCHES NOMINAL |
| AMDJ | FIRST END TONGUE THICKNESS | 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.3120 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | TONGUE ROUNDED ENDS |