Part Number
Part Number:
NSN:
NIIN:
Item Name:
PIN , STRAIGHT , HEADLESS
Definition:
A HEADLESS, CYLINDRICALLY-SHAPED ITEM HAVING A STRAIGHT, SMOOTH, SOLID BODY, WITH OR WITHOUT A DRILLED HOLE(S). IT HAS AN OUTSIDE DIAMETER EQUAL TO OR LESS THAN ITS LENGTH. ITS LENGTH MUST NOT EXCEED TWELVE INCHES (304 MM); FOR ITEMS WHOSE LENGTH EXCEEDS TWELVE INCHES (304 MM); SEE ROD, STRAIGHT, HEADLESS. IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. SEE ALSO PIN, STRAIGHT, THREADED.
CAGE Information
| Code | Company |
|---|---|
| 99971 | LOCKHEED MARTIN CORP NAVAL ELECTRONI |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRMG | FIRST END TAPER ANGLE | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM |
| CRMG | FIRST END TAPER ANGLE | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| ACHT | PIN OVERALL LENGTH | 0.840 INCHES NOMINAL |
| ACHU | PIN OVERALL DIAMETER | 0.1259 INCHES MINIMUM AND 0.1261 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 416 OVERALL |
| AMCS | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| AMFM | SECOND END TAPER LENGTH | 0.090 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CHAMFERED |
| FEAT | SPECIAL FEATURES | FIRST END HAS ONE FLAT 0.140 IN. LG,0.051 IN. DP |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAGZ | FIRST END STYLE | CHAMFERED |
| CTHC | SECOND END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |