Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT ASSEMBLY , FLEXIBLE
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
CAGE Information
| Code | Company |
|---|---|
| 0KZS2 | S.S. WHITE TECHNOLOGIES INC. |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CFRP | CASING LENGTH BETWEEN FERRULES | 7.850 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF FIRST END |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| AXYS | SPLINE TYPE | INVOLUTE FIRST END |
| CFRW | END OVERALL DIAMETER | 0.813 INCHES NOMINAL FIRST END |
| CFRM | TORSIONAL DEFLECTION RATING | 12 DEG FT -LB IN. TORSIONAL DEFLECTION RATING 20 DEG FT-LB IN,TORSIONAL DEFLECTION RATIONING UNWINDING DIRECTION |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| BPPL | WRENCHING FACILITY TYPE | KNURLED SURFACE FIRST END |
| ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
| AEDN | TIP LENGTH | 0.469 INCHES NOMINAL FIRST END |
| APJC | THREAD LOCATION | INTERNAL FIRST END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL FIRST END |
| ABSA | SPLINE QUANTITY | 12 FIRST END |
| BJPS | CASING MATERIAL | STEEL |
| CFRN | CASING SURFACE TREATMENT | ZINC COATED |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL FIRST END |
| AJXJ | CORE MATERIAL | STEEL |
| CFSM | STRENGTH RATING CHARACTERISTICS (NON-CORE) | ERR-070 |
| AKMH | CORE DIAMETER | 0.212 INCHES NOMINAL |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.556 INCHES NOMINAL FIRST END |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | 0.813 INCHES NOMINAL FIRST END |
| CFRQ | CASING OUTSIDE DIAMETER | 0.456 INCHES NOMINAL |
| ABSC | SPLINE MINOR DIAMETER | 0.208 INCHES NOMINAL FIRST END |
| AASA | THREAD LENGTH | 0.344 INCHES NOMINAL FIRST END |
| ZZZV | FSC APPLICATION DATA | PEDAL INSTALLATION,RUDDER AND BRAKE,AIRCRAFT |
| CFRR | CASING PROTECTIVE DEVICE TYPE | BRAIDED WIRE SHIELD |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 FIRST END |
| CGDN | MINIMUM OPERATING RADIUS | 3.000 INCHES |
| ABHP | OVERALL LENGTH | 11.038 INCHES NOMINAL |
| AXFH | SPLINE LENGTH | 0.250 INCHES NOMINAL FIRST END |
| CFRZ | CORE OVERALL LENGTH | 11.038 INCHES NOMINAL |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CFRY | LUBRICATION FITTING | NOT PROVIDED FIRST END |
| BDRL | SETSCREW | NOT INCLUDED FIRST END |
| AKMF | CORE SURFACE TREATMENT | CADMIUM PLATED |
| AAJD | THREAD CLASS | 3B FIRST END |
| CFRT | SWIVEL END | PROVIDED FIRST END |
| AAUJ | SPLINE MAJOR DIAMETER | 0.292 INCHES NOMINAL FIRST END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.406 INCHES CLEANING WIRE ANY ACCEPTABLE FIRST END |
| APTD | END TYPE | ROUND, INTERNAL SPLINED FIRST END |