Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FINCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSTIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE REHOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 76301 | BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| ABXF | SHAFT LENGTH | 0.680 INCHES NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AEFK | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| AEDZ | SHAFT BEARING TYPE | BALL |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 76301-75B610063 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ADAQ | BODY LENGTH | 1.508 INCHES MAXIMUM |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| ABTB | MOUNTING HOLE DIAMETER | 0.196 NOMINAL MILS |
| ABPM | BODY DIAMETER | 2.850 NOMINAL CENTIMETERS |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 7TH SECONDARY QUALITY |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 60.0 NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 52.0 NOMINAL |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 135.0 SINGLE SECTION |
| ADAV | OVERALL DIAMETER | 2.850 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | FOURTH LEAD CASE GROUND; CONNECTOR PART NUMBER MS27467T9B35P ATTACHED TO LEADS |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEFL | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -15.0/+15.0 SINGLE SECTION |
| AGAV | END ITEM IDENTIFICATION | STABILATOR POSITION |
| ABHP | OVERALL LENGTH | 1.250 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |