Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 03538 | LOCKHEED MARTIN CORPORATION DBA MS2 |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| ABXF | SHAFT LENGTH | 1.000 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 7TH SECONDARY FINISH |
| ABPC | UNDERCUT WIDTH | 0.0600 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| AAPN | SECTION QUANTITY | 3 |
| AAVL | PILOT DIAMETER | 1.8750 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0600 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| AXGY | MOUNTING METHOD | SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 7TH SECONDARY GRAMS |
| TTQY | TERMINAL TYPE AND QUANTITY | 9 BINDING POST |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 7TH SECONDARY PATTERN |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 PERCENT, RATED AMPERES C AND BETTER SELECT |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.000 INCHES NOMINAL |
| CRJS | FIXED TAP QUANTITY PER SECTION | 5 1ST SECTION |
| AEDA | MOUNTING LIP DEPTH | 0.0600 INCHES NOMINAL |
| CRJS | FIXED TAP QUANTITY PER SECTION | 5 2ND SECTION |
| AKPV | MOUNTING FACILITY QUANTITY | 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 OHMS ALL SECTIONS |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CRJS | FIXED TAP QUANTITY PER SECTION | 5 3RD SECTION |
| ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 55.0 ALL SECTIONS |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |