Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 19200 |
U S ARMY ARMAMENT RESEARCH & DEVELOP |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ATPC |
STEP QUANTITY |
6 |
| ATPC |
STEP QUANTITY |
6 |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| FEAT |
SPECIAL FEATURES |
CONSISTS OF PIN-MS24692-102,ADAPTER-7666196,SHAFT-7666200. CORROSION RESISTING STEEL,CLASS 303 |
| MATT |
MATERIAL |
STEEL COMP 303 |
| AMHM |
SECOND END DISTANCE FROM BEARING SEAT TO END |
0.4375 INCHES NOMINAL |
| AMEJ |
FIRST END BEARING SEAT LENGTH |
0.150 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
0.499 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
BEARING SEAT |
| AMDL |
FIRST END DIAMETER |
0.3740 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
BEARING SEAT |
| CSPY |
LARGEST STEP DIAMETER |
0.680 INCHES NOMINAL |
| AMEL |
FIRST END BEARING SEAT DIAMETER |
1.3750 INCHES NOMINAL |
Similar Parts