Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMDR |
FIRST END PRESSURE ANGLE |
30.0 DEGREES NOMINAL |
| AMDN |
FIRST END SPLINE MINOR DIAMETER |
0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
SPLINED (INVOLUTE) |
| ATPC |
STEP QUANTITY |
2 |
| AMDM |
FIRST END SPLINE LENGTH |
0.9400 INCHES NOMINAL |
| BDSQ |
FIRST END SPLINE QUANTITY |
14 |
| AMDS |
FIRST END PITCH DIAMETER |
0.7000 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.7380 INCHES MINIMUM AND 0.7430 INCHES MAXIMUM |
| AMDP |
FIRST END SPLINE MAJOR DIAMETER |
0.7380 INCHES MINIMUM AND 0.7430 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
8.250 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 8640 OR STEEL COMP 8740 OR STEEL COMP 4140 |
| AAHN |
END SIMILARITY |
IDENTICAL |
Similar Parts