Part Number
Part Number:
NSN:
NIIN:
Item Name:
PIN , SHOULDER , HEADLESS
Definition:
A CYLINDRICALLY-SHAPED HEADLESS ITEM, HAVING A SHANK AT ONE OR BOTH ENDS. IT IS USED FOR ALIGNING, FASTENING, OR TRANSFER OF TORQUE AND/OR THRUST BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE THREADED ON ONE END.
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.145 INCHES NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.145 INCHES NOMINAL |
| CRMG | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| CTHC | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| ABRC | FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL |
| AAVH | SHOULDER DIAMETER | 0.496 INCHES MINIMUM AND 0.497 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.094 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 1015 TO 1025 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQFM | HARDNESS RATING | 88.9 ROCKWELL SUPERFICIAL 15-N MINIMUM OVERALL AND 91.1 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STYL | STYLE DESIGNATOR | SHOULDER |
| AATR | SHANK LENGTH | 0.625 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| AAHP | SECOND END STYLE | CHAMFERED |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| AAZE | SHANK DIAMETER | 0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | CASEHARDENED |
| CSYM | SURFACE FINISH | 32.000 MICROINCHES OVERALL |
| CQTR | SECOND SHANK DIAMETER | ANY ACCEPTABLE |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| AASA | THREAD LENGTH | 0.510 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | CHAMFERED |
| AMFM | SECOND END TAPER LENGTH | 0.062 INCHES NOMINAL |
| CWAS | SECOND SHANK LENGTH | ANY ACCEPTABLE |